The Section, And Why It Is Shaped Like That
The "J" profile is not decorative - each fold has a job:
- Upper flange flared to widen the tile contact area
- Lower flange narrow for a clean fixing line
- Cold-formed in one pass: consistent section, no warp

|
Feature |
Value |
Function |
|
Section |
67 × 21 mm (height customizable) |
Standard tile batten module |
|
Thickness |
0.5–0.8 mm |
Span and screw pull-out |
|
Ribs |
8 reinforcing ribs |
Resists buckling under foot traffic |
|
Surface |
Anti-slip emboss |
Screw heads seat without skidding |
|
Coating |
Aluminised-zinc, high coat weight |
No on-site painting |

Metal Vs Timber, Through The Roof's Life

The comparison is not about the first season:
- No rot, no borer, no warping at the fixing line
- Galvanised section: no organic content, unlike timber
- Dimensional stability keeps the tile course true, so the roof does not go wavy
- No preservative treatment, no re-coating, no annual inspection of the batten


Spacing Is A Load Calculation
Batten spacing follows the tile and the local snow load, not a house rule. The spacing sheet covers tile type against load case, and the companion leveling support takes out an uneven substrate before the battens are fixed - which is the usual reason a new tile roof looks old.
Evidence
- Section drawing: 67 × 21 mm with rib detail
- Coating specification and section drawing
- Spacing sheet by tile type and load case
- Leveling support: ± adjustment range
FAQ
Q1. What is the section?
67 × 21 mm, height customizable; thickness 0.5–0.8 mm.
Q2. Why eight ribs?
They carry foot traffic and screw pull-out without buckling the section.
Q3. Does it need painting?
No - the aluminised-zinc coating is factory applied.
Q4. What sets batten spacing?
Tile type plus the local snow load, from the spacing sheet.

Get Batten + Screw Count
Send the tile type and the roof area; we return the batten count, the screw count and the spacing for your load case.
Hot Tags: metal roof tile battens, China metal roof tile battens suppliers, factory

