Screw By Substrate
The batten is only as fixed as the screw beneath it:
- Stainless or coated screws where the batten is in a wet zone
- Screw on the batten centre line, not on the flange edge
- Two fixings per intersection, not one


|
Substrate |
Fixing |
Watch point |
|
Timber rafter |
Self-drilling wood screw |
Penetration depth, not length |
|
Steel purlin |
Self-drilling tek screw |
Point type and thickness range |
|
Concrete / masonry |
Expansion bolt via leveling support |
Hole depth and dust clearing |
Leveling Before Fixing
On a renovation the substrate is rarely true, and a batten fixed to an untrue plane makes every tile course follow the error. The adjustable support carries a double-nut screw that moves a few centimetres in height, fixed with expansion bolts into concrete or masonry, with the J-profile sub-frame sitting on top.
Inspection Points
What a supervisor should sign before the tiles go on:
- Batten gauge within tolerance along the full slope
- No screw head standing proud of the batten face
- Every penetration above the batten line
- Level deviation measured, not eyeballed
Evidence
- Screw selection table by substrate
- Leveling support: adjustment range and fixing method
- Anchor specification and hole depth
- Inspection card for site sign-off
FAQ
Q1. Which screw for a steel purlin?
A self-drilling tek screw matched to the purlin thickness range.
Q2. How do I fix to concrete?
Expansion bolt through the leveling support, hole depth per the anchor data.
Q3. What if the wall is uneven?
The leveling support takes out a few centimetres before the sub-frame goes on.
Q4. What is inspected?
Gauge, screw heads, penetrations and measured level deviation.

Send Substrate for Fixing Plan
Send the substrate type and the batten gauge; we return the screw schedule and the leveling support layout.
Hot Tags: fixing roof battens, China fixing roof battens suppliers, factory

