One Piece, No Joint
The wall panel runs the full height in a single sheet, which removes the horizontal joint that normally collects dirt and water on an industrial elevation.
- Concealed hook: no visible screw on the finished wall
- Length unlimited - full height in one piece
- Drainage points at the base, accessible for inspection
- Sub-frame on adjustable supports, levelled before cladding

Phasing And Colour Continuity
Matching a colour across phases is a records problem. The batch record from phase one is kept with the project file: coating roll, colour reference and gloss. Phase two is then ordered against that record rather than against a photograph, which is the only way a large site avoids a visible seam between buildings.
|
Record |
Kept at |
Used for |
|
Coating batch |
Project file |
Phase-two colour match |
|
Colour reference |
Project file |
Sample approval |
|
Panel profile |
Drawing set |
Later extensions |
Installation Speed On A Large Wall
On 8,000 m² of elevation, the sequence decides the programme: supports first, sub-frame levelled in one pass, then panels from the base up in full-height runs. Because the hook is closed after the panel is hung, the wall can be closed without waiting for the top of the building.
Evidence
- Wall section with concealed hook and drainage points
- Full-height panel capability (unlimited length)
- Batch record format for phase matching
- Completed multi-phase logistics park
FAQ
Q1. Can phase two match phase one?
Yes, from the batch record kept with the project file.
Q2. Is there a horizontal joint?
No - panels run full height in one piece.
Q3. How is the wall drained?
Drainage points at the base, behind the panel, accessible for inspection.
Q4. Can it close before the roof?
Yes, the wall runs from the base up independently of the roof sequence.

Send Area + Phase Plan
Send the elevation area and the phase plan; we return the panel schedule plus a colour continuity record for the later phases.
Hot Tags: warehouse metal wall cladding, China warehouse metal wall cladding suppliers, factory

