Concealed Fastener Metal Wall Cladding Systems

Concealed Fastener Metal Wall Cladding Systems

The most expensive question on a commercial facade is not “what does it cost” but “will it leak behind the panel”. Concealed Fastener Metal Wall Cladding Systems answer it structurally: the hook is hidden, the panel runs in one piece, and the water that gets behind the rain screen drains out at the base instead of sitting on the substrate.

The Section, In Order

 

Four layers, each with a job, and the fastener belongs to the third one:

  • Panel: concealed hook, no visible fixing, 25–263 mm profile
  • Sub-frame: J-profile on adjustable leveling supports, levelled before cladding
  • Drainage and ventilation cavity: the path water uses to leave
  • Insulation and structural wall behind it, dry by design

2

 

The Profile Range

 

The square-duct family covers most commercial expressions:

Parameter

Value

Note

Profile width

25–263 mm

the visual rhythm

Length

unlimited

one piece, no joint

Galvalume steel

0.5–0.8 mm

standard commercial

Al-Mg-Mn

0.8–1.0 mm

coastal / severe exposure

Colour

custom RAL or sample match

one batch per elevation

 

3

 

Against The Standard Aluminium Box

 

The conventional way to build a square-duct facade is a folded aluminium box fixed to a back panel with adhesive and rivets. It works, and it costs more than it should: adhesive ages and cracks, length stops at 6 m, weight passes 8 kg/m², and the whole assembly is priced on unfolded area. The concealed hook system skips the back panel and the glue, runs in one piece, and lands at roughly a third of the construction cost.

 

Evidence

 

  • Wall section drawing: panel, cavity, sub-frame, insulation
  • Profile width range 25–263 mm with material options
  • Comparison table against the folded aluminium box system
  • Completed facades with drainage points visible

 

FAQ

 

Q1. How is water handled behind the panel?

A drained and ventilated cavity: water leaves at the base, the substrate stays dry.

Q2. What widths are available?

25–263 mm, unlimited length.

Q3. How does it compare with a folded aluminium box?

No back panel, no adhesive, one-piece runs, roughly a third of the construction cost.

Q4. Which substrate for a coastal site?

Al-Mg-Mn 0.8–1.0 mm, with sealed cut edges.

 

modular-1
Send Elevation for Section

Send the elevation and the substrate; we return the section, the sub-frame layout and the drainage detail for the wall build-up.

 

Hot Tags: concealed fastener metal wall cladding systems, China concealed fastener metal wall cladding systems suppliers, factory

Send Inquiry