Flush Metal Wall Cladding Systems

Flush Metal Wall Cladding Systems

“Flush” is a promise about flatness, and flatness is the hardest thing to hold in a thin metal facade. Flush Metal Wall Cladding Systems hold that plane with a concealed step joint: the panel edges fold into a drip apron, the connector disappears underneath, and the elevation reads as one surface rather than a set of sheets.

How The Joint Disappears

 

The visual joint is a shadow line, not a gap. The step profile's return covers the connector, so at 3 m the wall shows a rhythm of fine lines and no fasteners; at 300 mm it still shows no screw, no cap and no mastic bead.

  • Step heights 14 / 20 / 25 mm - the step sets the shadow weight
  • Effective widths 200–800 mm, or a fixed 376 mm on style 1
  • Concealed connectors, hidden behind the panel return
  • Structural drip edge on both long edges

 

Holding The Plane

 

Flatness is decided by three things on site, not by the panel alone:

Factor

Setting

Why it matters

Sub-frame

levelled, ±3 mm over 3 m

panel follows the frame

Fixing sequence

centre outwards

stops edge wave

Panel length

longer = fewer laps

fewer interruptions in the plane

 

Retrofit On An Uneven Wall

 

On a renovation the old wall is rarely straight. The adjustable leveling support takes the unevenness out before the cladding starts - a galvanised bracket with a double-nut screw that adjusts a few centimetres in height, fixed with expansion bolts into concrete or masonry, carrying the J-profile sub-frame that the panels clip to.

 

Evidence

 

  • Step-joint detail with connector hidden
  • Leveling support: adjustable range and fixing method
  • Flatness target and inspection method
  • Completed facade at 3 m and 300 mm

 

FAQ

 

Q1. How flat can it be?

Set by the sub-frame: levelled to ±3 mm over 3 m, with the panel following the frame.

Q2. What makes the joint invisible?

A folded return covers the connector; the joint reads as a shadow line.

Q3. Can it go over an old wall?

Yes - the adjustable leveling support takes out the unevenness first.

Q4. Which step height for a large elevation?

25 mm for a stronger shadow line, 14 mm for a quieter surface.

 

modular-1
Send Elevation for Joint Layout

Send the elevation and the substrate condition; we return the joint layout, the sub-frame spacing and the flatness target for the specification.

 

Hot Tags: flush metal wall cladding systems, China flush metal wall cladding systems suppliers, factory

Send Inquiry