The Three Bands
Same profile, different steel and coating - the honest way to sell a price-led product:
|
Band |
Build |
Intended life |
|
Economy |
0.5 mm AZ150, polyester |
Short-hold, dry climate |
|
Standard |
0.6 mm AZ150, polyester/SMP |
General agricultural |
|
Extended |
0.8 mm AZ150 or Al-Mg-Mn 0.8–1.0, PVDF |
Coastal or long-hold |
What Thin Steel Costs Later
A 0.5 mm sheet is not a 0.6 mm sheet with less metal - it is a different roof. Thinner gauge dents under foot traffic, buckles between purlins at wide spacing, and loses the flatness that makes a corrugated roof read as deliberate. On a shed nobody minds. On a house, the customer notices on the first walk across it.
- Purlin spacing must follow the gauge, not the habit
- Cut edges are the first corrosion point on any band
- Packing decides how much arrives flat
Packing And Loading
Corrugated sheet is a shape, and shape is what shipping damages. Bundles are strapped with edge protection and loaded on a flat bed with the corrugations nested, so the delivered stack still looks like the sample.
Evidence
- Three-band specification table with thickness and coating
- Purlin spacing guidance per gauge
- Packing standard: nesting, strapping, edge protection
- Thickness and coating table by grade, one line per band
FAQ
Q1. What is the difference between the bands?
Steel thickness and coating: 0.5 / 0.6 / 0.8 mm, polyester through to PVDF.
Q2. Which band for a coastal site?
Extended with PVDF, or Al-Mg-Mn where the budget allows.
Q3. Does gauge change purlin spacing?
Yes - spacing follows the gauge, and the table states the limits.
Q4. How is it packed?
Nested bundles, strapped with edge protection, loaded on a flat bed.

Get Three-Band Quote
Ask for the three-band quote on the same specification sheet - compare the steel, not just the number.
Hot Tags: corrugated metal roofing sheets, China corrugated metal roofing sheets suppliers, factory

